farmall 200 wheel spacers

[farmallfarms]

hello i have farmall 200 and the front wheels are not factory they are replacement 6 lug. i put a set of tires and wheels off a 560 and they are so fat they touch at the bottom and make it hard to steer. i was looking for some 1/4 thick wheel spacers. if anybody knows where to get them it would b appreciated. they are 6 lug and measured 7" in diameter. thanks

[Matt Kirsch]

Have you tried flipping the wheels over and putting them on "backwards?" The rims have an offset to them, and are closer to one edge of the rim than the other.

I am not aware of any commercially available wheel spacers for your application. You would have to have them cut on a plasma table by a machine shop.

[Barnyard]

Try these guys http://www.ezaccessory.com/6_Lug_Wheel_Spacers_s/59.htm.

You'll need longer lug bolts.

[farmallfarms]

i fliped them around but i dont want them that wide.

[Matt Kirsch]

Unfortunately Barnyard, the standard 6-lug tractor/implement bolt pattern is a 6" circle, and the 6-lug spacers on that website are on a 5.5" circle.

[farmallfarms]

would the front hubs off of an A or a B fit it?