Brought these home the other day. came with the stands and a speed wrench
Came with every thing to mount it to my SC except the implement bolts. Not sure if they are the same as a cubs or if they are different?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Finaly got a set of bottom plows
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Finaly got a set of bottom plows
Pete from Virginia Beach
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Finaly got a set of bottom plows
I am not sure, but I think an SC uses 3/4 inch bolts rather than the 5/8 a cub uses.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Finaly got a set of bottom plows
You get axle clamps? They are the only thing I can think of that I'm not seeing in the pictures. I'm not sure on the bolt sizes either.
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: Finaly got a set of bottom plows
Jim I have the brackets that mount it to the axle and the bracket that bolts to the right side light bar for the adjusting rod. Seems to be a complete set up minus the bolts for the torque tube.
Ill have to research the bolts a little more. The PO gave me a copy of the manual so it should state in there some ware. I havent had a chance to look at it yet. One of the landslides is worn pretty bad, nor sure were to get parts for these plows. I could always fab something up out of some 3/8 plate i guess.
Ill have to research the bolts a little more. The PO gave me a copy of the manual so it should state in there some ware. I havent had a chance to look at it yet. One of the landslides is worn pretty bad, nor sure were to get parts for these plows. I could always fab something up out of some 3/8 plate i guess.
Pete from Virginia Beach
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: Finaly got a set of bottom plows
Just got done looking at my copy of the manual. It is missing or leaves out the taper head bolts and the actual plow with parts break down. I will look for nthe bolts that John called out.
Has any one rebuilt one of these set ups. This is a 1952, C-295-A Two Furrow One-Way Moldboard Plow (12" and 14") Built 1951 to 1955?
Has any one rebuilt one of these set ups. This is a 1952, C-295-A Two Furrow One-Way Moldboard Plow (12" and 14") Built 1951 to 1955?
Pete from Virginia Beach
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Finaly got a set of bottom plows
64/67lo-boy wrote:Just got done looking at my copy of the manual. It is missing or leaves out the taper head bolts and the actual plow with parts break down. . . .
Look for the listings of the right and left hitch rail supports (the parts held on by these bolts). listed below each of them you should find a call out for the bolt:
30577B screw, cap, conical-hex-hd, 3/4-10NC x 1-1/2"
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: Finaly got a set of bottom plows
Thanks John and Jim you guys were right on with the info. I found some new old stock bolts and they will be ariving in the mail soon.
Now for my next question. The actual plows are not shown in the parts break down in the manual. I did some research and it seams there were two sizes, 12" and 14". What determins the size?
and there are two types , the Super Chief and the Plow Chief. I think I have the Plow Chief. I found some parts on the internet but I need the actual IH part numbers to cross over to their numbers. Thanks again.
Now for my next question. The actual plows are not shown in the parts break down in the manual. I did some research and it seams there were two sizes, 12" and 14". What determins the size?
and there are two types , the Super Chief and the Plow Chief. I think I have the Plow Chief. I found some parts on the internet but I need the actual IH part numbers to cross over to their numbers. Thanks again.
Pete from Virginia Beach
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Finaly got a set of bottom plows
Yes, you have Plow Chief bottoms. Measure directly across center to center of the 2 beams. It will measure either 12 or 14 inches.
-
- 10+ Years
- Posts: 4587
- Joined: Mon Apr 17, 2006 9:17 pm
- Zip Code: 65626
- Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155 - Circle of Safety: Y
- Location: MO, Bakersfield, (South - Central)
Re: Finaly got a set of bottom plows
Good find!!!
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
High atop Hummingbird Hill
In the Missouri Ozarks
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Finaly got a set of bottom plows
The bottoms are treated as separate implements. They have their own parts books.
Unfortunately most plow chief stuff is hard to find if not impossible. You can still find the chisel points new in low-quality "pig iron" at places like Agri Supply. The rest, not so much.
Unfortunately most plow chief stuff is hard to find if not impossible. You can still find the chisel points new in low-quality "pig iron" at places like Agri Supply. The rest, not so much.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 4 guests