This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Finaly got a set of bottom plows

Farmall C, Super C Tractors, 200 & 230 1948-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
64/67lo-boy
10+ Years
10+ Years
Posts: 383
Joined: Sun Nov 23, 2008 2:46 pm
Zip Code: 23453
Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c
Circle of Safety: Y
Location: Virginia Beach

Finaly got a set of bottom plows

Postby 64/67lo-boy » Sun Mar 23, 2014 1:46 pm

Brought these home the other day. came with the stands and a speed wrench
IMGP1193.jpg
IMGP1193.jpg (89.87 KiB) Viewed 1389 times
IMGP1192.jpg
IMGP1192.jpg (114.22 KiB) Viewed 1389 times
IMGP1194.jpg
IMGP1194.jpg (112.62 KiB) Viewed 1389 times


Came with every thing to mount it to my SC except the implement bolts. Not sure if they are the same as a cubs or if they are different?
Pete from Virginia Beach

SPONSOR AD

Sponsor



Sponsor
 

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Finaly got a set of bottom plows

Postby John *.?-!.* cub owner » Sun Mar 23, 2014 3:17 pm

I am not sure, but I think an SC uses 3/4 inch bolts rather than the 5/8 a cub uses.
If you are not part of the solution,
you are part of the problem!!!

Jim Becker
Team Cub
Team Cub
Posts: 17242
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Finaly got a set of bottom plows

Postby Jim Becker » Sun Mar 23, 2014 4:05 pm

You get axle clamps? They are the only thing I can think of that I'm not seeing in the pictures. I'm not sure on the bolt sizes either.

User avatar
64/67lo-boy
10+ Years
10+ Years
Posts: 383
Joined: Sun Nov 23, 2008 2:46 pm
Zip Code: 23453
Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c
Circle of Safety: Y
Location: Virginia Beach

Re: Finaly got a set of bottom plows

Postby 64/67lo-boy » Sun Mar 23, 2014 4:55 pm

Jim I have the brackets that mount it to the axle and the bracket that bolts to the right side light bar for the adjusting rod. Seems to be a complete set up minus the bolts for the torque tube.

Ill have to research the bolts a little more. The PO gave me a copy of the manual so it should state in there some ware. I havent had a chance to look at it yet. One of the landslides is worn pretty bad, nor sure were to get parts for these plows. I could always fab something up out of some 3/8 plate i guess.
Pete from Virginia Beach

User avatar
64/67lo-boy
10+ Years
10+ Years
Posts: 383
Joined: Sun Nov 23, 2008 2:46 pm
Zip Code: 23453
Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c
Circle of Safety: Y
Location: Virginia Beach

Re: Finaly got a set of bottom plows

Postby 64/67lo-boy » Sun Mar 23, 2014 5:20 pm

Just got done looking at my copy of the manual. It is missing or leaves out the taper head bolts and the actual plow with parts break down. I will look for nthe bolts that John called out.

Has any one rebuilt one of these set ups. This is a 1952, C-295-A Two Furrow One-Way Moldboard Plow (12" and 14") Built 1951 to 1955?
Pete from Virginia Beach

Jim Becker
Team Cub
Team Cub
Posts: 17242
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Finaly got a set of bottom plows

Postby Jim Becker » Sun Mar 23, 2014 8:18 pm

64/67lo-boy wrote:Just got done looking at my copy of the manual. It is missing or leaves out the taper head bolts and the actual plow with parts break down. . . .

Look for the listings of the right and left hitch rail supports (the parts held on by these bolts). listed below each of them you should find a call out for the bolt:
30577B screw, cap, conical-hex-hd, 3/4-10NC x 1-1/2"

User avatar
64/67lo-boy
10+ Years
10+ Years
Posts: 383
Joined: Sun Nov 23, 2008 2:46 pm
Zip Code: 23453
Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c
Circle of Safety: Y
Location: Virginia Beach

Re: Finaly got a set of bottom plows

Postby 64/67lo-boy » Tue Mar 25, 2014 8:16 pm

Thanks John and Jim you guys were right on with the info. I found some new old stock bolts and they will be ariving in the mail soon.

Now for my next question. The actual plows are not shown in the parts break down in the manual. I did some research and it seams there were two sizes, 12" and 14". What determins the size?

and there are two types , the Super Chief and the Plow Chief. I think I have the Plow Chief. I found some parts on the internet but I need the actual IH part numbers to cross over to their numbers. Thanks again.
Pete from Virginia Beach

Jim Becker
Team Cub
Team Cub
Posts: 17242
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Finaly got a set of bottom plows

Postby Jim Becker » Wed Mar 26, 2014 1:03 am

Yes, you have Plow Chief bottoms. Measure directly across center to center of the 2 beams. It will measure either 12 or 14 inches.

VinceD
10+ Years
10+ Years
Posts: 4587
Joined: Mon Apr 17, 2006 9:17 pm
Zip Code: 65626
Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155
Circle of Safety: Y
Location: MO, Bakersfield, (South - Central)

Re: Finaly got a set of bottom plows

Postby VinceD » Wed Mar 26, 2014 7:07 pm

Good find!!!
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
Image

Matt Kirsch
10+ Years
10+ Years
Posts: 4947
Joined: Tue Jun 08, 2004 3:04 pm
Zip Code: 14559
Circle of Safety: Y
Location: Rochester, NY

Re: Finaly got a set of bottom plows

Postby Matt Kirsch » Mon Mar 31, 2014 1:03 pm

The bottoms are treated as separate implements. They have their own parts books.

Unfortunately most plow chief stuff is hard to find if not impossible. You can still find the chisel points new in low-quality "pig iron" at places like Agri Supply. The rest, not so much.


Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 4 guests