Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 1:02 pm

Anyone had the pleasure of rebuilding the auxiliary control valve on a Fast Hitch equipped Super C? PM me if you have. Thanks.

Image
Photo courtesy eBay
Last edited by Don McCombs on Sun Nov 24, 2013 4:04 pm, edited 1 time in total.

Re: Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 2:43 pm

Timely post. I need to rebuild mine, so I'll be keeping an eye on this thread :-)

Re: Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 6:38 pm

Sorry, no help here. I have never had mine apart.

Re: Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 8:15 pm

Not that particular control valve. Control valves are usually simple, straight forward. Only needing to replace the O-rings and seals.

Try and find the parts diagram.

Re: Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 9:12 pm

I have the parts diagram, Eugene. Just looking for a little "been there, done that" advice from someone that has done it.

Re: Touch Control Auxiliary Control Valve

Sun Nov 24, 2013 9:45 pm

Don McCombs wrote:Just looking for a little "been there, done that" advice from someone that has done it.
Simple, nothing to it. Much easier than a touch control or even the Cub's hydraulic pump.

You can do it, I have faith in you abilities. Disassemble, clean parts being careful on the keeping things clean, inspect bore and spool valve. Perhaps a return spring. Replace the o-rings and seals.

As I previously stated, I have repaired several control valves and some hydraulic cylinders, just not that particular valve. The hardest part of the repair was getting to and removing, then reinstalling the repaired valve.

Re: Touch Control Auxiliary Control Valve

Sat Jan 25, 2014 9:41 pm

Don:
I have the same issue too ! Let me know what you find out.

Baldwindiesel