Switch to full style
Farmall C & Super C Tractors, 1948-1954

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

? regarding hydraulics on Super C Farmall

Mon May 07, 2012 8:36 pm

Is it possible to add a hydraulic "block" to the Super C to operate a remote device ? If so does anyone have a source for purchasing a block
Thanks, Berlin

Re: ? regarding hydraulics on Super C Farmall

Thu Aug 02, 2012 4:16 pm

I don't know if you ever got an answer , but the one for a super A should work on a C. I got mine from,

P Tutusha
301 Colvin Ave.
Buffalo, NY. 14216

Sorry , I don't have a phone #.

Re: ? regarding hydraulics on Super C Farmall

Thu Aug 02, 2012 5:37 pm

http://www.ebay.com/itm/Hydraulic-By-pa ... 4605ac0f76

That should fix you up :wink:
Boss

Re: ? regarding hydraulics on Super C Farmall

Thu Aug 02, 2012 5:40 pm

The originals were made different and took different lines
But the one above should work

Re: ? regarding hydraulics on Super C Farmall

Thu Aug 02, 2012 8:22 pm

Thanks ,I'll relay the info. and I do appreciate your responses.
Berlin

Re: ? regarding hydraulics on Super C Farmall

Fri Aug 03, 2012 12:08 pm

I can relate first hand, that particular block works MINT on a Super C.

We've got a two-spool hydraulic valve running a fast hitch and a rear remote on Dad's Super C. Now that we got the governor issue sorted out and it's turning the prescribed 1800RPM, it's a handy little tractor.

Re: ? regarding hydraulics on Super C Farmall

Fri Aug 03, 2012 3:22 pm

The link Boss Hog provided is the one . I had lost the ebay link.
Post a reply