SC touch control
Moderator: Team Cub
3 posts
• Page 1 of 1
SC touch control
by Hairy Moose Knuckles » Sun Jun 07, 2009 9:59 pm
Is there any special trick getting the hydraulics to work on a Super C? I pull/push the levers and nothing! It was working before I brought it home. I haven't tried it till today
- Hairy Moose Knuckles
- Cub Star
- Posts: 76
- Joined: Sun Feb 17, 2008 12:32 pm
- Location: Central Texas
- Zip Code: 76635
Re: SC touch control
by John *.?-!.* cub owner » Mon Jun 08, 2009 7:51 am
nope, other than the engine has to be running. 
Might want to check the fluid level, they have the same problem with the seal/o ring leaking into the engine as a cub has. The touch control manual in the Blue Ribbon section of Rudi's server covers Super A and C, as well as cub.
Might want to check the fluid level, they have the same problem with the seal/o ring leaking into the engine as a cub has. The touch control manual in the Blue Ribbon section of Rudi's server covers Super A and C, as well as cub."The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17893
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Re: SC touch control
by Hairy Moose Knuckles » Mon Jun 08, 2009 8:12 am
Thanks.
Yes, I had engine running and I just added fluid, but I mowed all day, so I will check to see if it leaked out.
Yes, I had engine running and I just added fluid, but I mowed all day, so I will check to see if it leaked out.
- Hairy Moose Knuckles
- Cub Star
- Posts: 76
- Joined: Sun Feb 17, 2008 12:32 pm
- Location: Central Texas
- Zip Code: 76635
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
|
|