Just wondering if anybody knows the size of the hydraulic pump "driveshaft" should be, like .500"..., last winter I bought a rebuild kit from C&G and rebuilt it, but it still seems to leak into the engine... i was just wondering if i could measure the shaft and get a real close idea with a micrometer or caliper, decide if i should start lookin for a used one, or possibly new? i won't have it apart for at least 2 weeks probably, so I just kinda wanna have my ducks in a row before i tear it down... maybe it would be just as good to get a whole new/used pump instead? the tractor has had a rough life i think... hydraulic fluid is not the cheapest thing to keep buying. and so is engine oil/filters
Thanks for any ideas/help
Johnny
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C hydraulic pump shaft
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
C hydraulic pump shaft
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
- SONNY
- 10+ Years
- Posts: 4110
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: C hydraulic pump shaft
Did the shaft seal get put in with the lip facing the right direction? --that could explain leakage around the shaft also!---I am not sure of actual shaft dia. thanks; sonny
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
Re: C hydraulic pump shaft
i would assume i put it in the right direction, i did notice when i took it apart, something inside was in upside down with tangs facing the wrong direction... but i would imagine i did get it going the right direction. when i took it apart, the nut that holds the gear on the end of the shaft was stripped out, the key was worn about half, and the shaft was just about garbage, i got a new key/gear/nut and replaced all of that, but it still seems to leak, i can't remember if the shaft was extremely worn, but I guess i'll find out when I take it apart
Thanks
Johnny
Thanks
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 7 guests