This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super C Engine Parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Guide
- Posts: 3280
- Joined: Thu Feb 20, 2003 4:54 pm
- Zip Code: 71203
- Tractors Owned: 1948,55, and 56 Farmall Cubs.
- Circle of Safety: Y
- Location: Louisiana
Super C Engine Parts
As I am starting to go back together with the engine, I have decided that the push rods and lifters need to be replaced. I believe water sat down in the top of the lifters and actually rusted the ends of the push rods. The lifters cleaned up ok but the push rods have a lot of pitting....so they're done. As I've been scouring the net looks for parts......I've ran across a couple of sets for the A and one for a BN. Does anybody know if the rods and lifters will fit in the C123 engine????
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Super C Engine Parts
give JP Tractor (one of the sponsors near the bottom of the page) a call or email. He will probably have anything you need.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 5 guests