This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super C and 240 wide front
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Paul B
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Super C and 240 wide front
This question was asked on another forum I am a member of, and so far no one has an answer. Is the wide front end on a "C"/Super "C" and a 240 the same, and will they swap out??
-
Jim Becker
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Super C and 240 wide front
The answer is "no" and "maybe".
The wide front for the C through 230 are the same, or close enough for all practical purposes. It has a wish-bone support that is integral with the axle center section and pivots on the same pin as the axle. The 240 wish bone is a separate part and pivots in a ball socket under the bell housing. A 240 axle wouldn't be good on the earlier tractors. The bolster is a different part number on the 240 than the other models as well, so I don't know if the earlier axle will work on a 240 or not.
This is all relative to the Farmall 240. A 240 Utility is another beast completely.
The wide front for the C through 230 are the same, or close enough for all practical purposes. It has a wish-bone support that is integral with the axle center section and pivots on the same pin as the axle. The 240 wish bone is a separate part and pivots in a ball socket under the bell housing. A 240 axle wouldn't be good on the earlier tractors. The bolster is a different part number on the 240 than the other models as well, so I don't know if the earlier axle will work on a 240 or not.
This is all relative to the Farmall 240. A 240 Utility is another beast completely.
-
Paul B
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Super C and 240 wide front
Thanks Jim, I passed your reply on to the original question poster.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 5 guests
