Brazed up the bearing seal cage plate yesterday. Threw it in the ashes in the wood stove for a slow cool down. Got it set up in the lathe as close as I could and machined it smooth. I had a few voids where I didn't get enough brass but I am not going to worry about it. A little paint and it will be ready to assemble.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Acquired a Farmall 230
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Shot some primer on the bearing and seal cage.
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Been putting in fences to get the cows out on pasture and now that is done. Spent some time the last few days cleaning bolts and gasket surfaces so I can start putting this project together. Painted the bolts and the front of the engine which will be mostly covered after assembly.
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Cleaned up more bolts this afternoon. These are for the governor, front pedestal and wheels. Had to sandblast the wheel bolts to get the rust off all of the others got a sonic cleaning, vibratory tumbler, and treated with Ospho.
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Sprayed the primer and red on the bolts. Its sunny today so they should dry nicely.
-
- 5+ Years
- Posts: 546
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Almost forgot about these parts that I had set on a shelf waiting for paint.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 1 guest