This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Acquired a Farmall 230
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
cjet69
- 5+ Years
- Posts: 541
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Brazed up the bearing seal cage plate yesterday. Threw it in the ashes in the wood stove for a slow cool down. Got it set up in the lathe as close as I could and machined it smooth. I had a few voids where I didn't get enough brass but I am not going to worry about it. A little paint and it will be ready to assemble.
-
cjet69
- 5+ Years
- Posts: 541
- Joined: Tue Dec 30, 2014 9:02 pm
- Zip Code: 00000
- Tractors Owned: Family owned: Over 30 antique tractors and 30 garden/lawn tractors
- Location: NW Washington
Re: Acquired a Farmall 230
Shot some primer on the bearing and seal cage.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: claudebot [Bot] and 2 guests
