Mine needs "convincing" to go together. What I did was bolt the angle iron piece to the final drive, then put the belt on the pulleys to support the mower. Then I used a big pry bar to bring the bracket and the angle iron into proper alignment. (Hopefully that makes sense) Also I leave the bolts on the front where it mounts to the bellhousing loose until there is a bolt through everything.
Al
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
A22 Mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: A22 Mower
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- 5+ Years
- Posts: 1
- Joined: Sat Apr 02, 2016 7:23 pm
- Zip Code: 03216
Re: A22 Mower
Hello All,
My first post on this forum.
I just brought home a Farmall 100 today. I bought an A-22 mower (separately) for it and am trying to see what's missing, what needs adjustment, etc. I have been mowing with a team and a #9 High Gear for several years and am ready to try a tractor. My experience w the #9 gives me some good experience setting up the cutterbar but the drive and lifting parts are new to me.
One part I am missing is the flywheel guard and was very impressed by Don's photos and description. I am also missing the angle iron that mounts to the wheel housing(BRACKET, belt drive adjusting; 455995R1) that the belt drive adjusting plate mounts to. Anyone have dimensions so I could fab one?
Also missing the belt shield which seems fab-able if I had dimensions.
Also missing both 457324R1 and 457323R1, the rockshaft arm EXTENSION and BRACKET. The Extension seems simple enough to make if I had dimensions and although the bracket is more complex I might try it given what I have seen for used prices.
Thanks for any help and thanks to all for this forum.
Mark
My first post on this forum.
I just brought home a Farmall 100 today. I bought an A-22 mower (separately) for it and am trying to see what's missing, what needs adjustment, etc. I have been mowing with a team and a #9 High Gear for several years and am ready to try a tractor. My experience w the #9 gives me some good experience setting up the cutterbar but the drive and lifting parts are new to me.
One part I am missing is the flywheel guard and was very impressed by Don's photos and description. I am also missing the angle iron that mounts to the wheel housing(BRACKET, belt drive adjusting; 455995R1) that the belt drive adjusting plate mounts to. Anyone have dimensions so I could fab one?
Also missing the belt shield which seems fab-able if I had dimensions.
Also missing both 457324R1 and 457323R1, the rockshaft arm EXTENSION and BRACKET. The Extension seems simple enough to make if I had dimensions and although the bracket is more complex I might try it given what I have seen for used prices.
Thanks for any help and thanks to all for this forum.
Mark
-
- Similar Topics
- Replies
- Views
- Last post
-
-
IH A-22 sickle mower
by JSTRICKLAND » Tue Dec 07, 2021 8:45 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 554
-
by JSTRICKLAND
Wed Dec 29, 2021 6:20 pm
-
-
-
Sickle bar mower Attachment(s)
by Welderman2020 » Tue Sep 07, 2021 4:03 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 8
- 565
-
by Matt Kirsch
Wed Sep 15, 2021 9:27 am
-
-
-
A22 mower decals
by chicken64 » Tue Aug 15, 2023 2:09 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 708
-
by staninlowerAL
Tue Aug 15, 2023 7:25 pm
-
-
-
sickle mower sections Attachment(s)
by 69ranger » Tue Nov 16, 2021 9:00 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 1236
-
by Backtoroots7
Sun Mar 13, 2022 6:19 am
-
-
-
Farmall A Mower Question Attachment(s)
by Kyle Delong » Sun Jun 19, 2022 7:39 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 244
-
by ShawnAgne
Mon Jun 27, 2022 8:12 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests