Replacing fan pulley assembly

Sat Jul 06, 2013 8:27 am

It looks like I'm going to have to take off the radiator to get the fan pulley unit off and then replace it. How do I do this?

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 9:20 am

You shouldn't need to remove the radiator. Remove the four small bolts holding the shrould, then loosen the fan pulley by putting a wrench on the flats on the shaft. DON'T turn the nut.

Bob

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 11:03 am

I have the pulley assembly loose but there's not enough room to pull everything out -- radiator is in the way. Plus fan blades are still on.

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 11:38 am

Just doesn't have quite enough room to get the thing out even with shroud removed.

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 2:51 pm

Unbolt fan from hub, btdt.

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 2:52 pm

Bob McCarty wrote:You shouldn't need to remove the radiator. Remove the four small bolts holding the shrould, then loosen the fan pulley by putting a wrench on the flats on the shaft. DON'T turn the nut.

Bob


100 not a cub :D

Re: Replacing fan pulley assembly

Sat Jul 06, 2013 2:57 pm

Sorry, I missed that when I read the thread.

Bob