Page 1 of 1

Pto sleeve for mower deck

Posted: Wed Aug 29, 2012 7:35 am
by fpchief
Forgive my ignorance. Trying to help my dad with his tractor. He has a 1970??? Farmall (yellow) with a woods mower deck. Our problem is the sleeve that slides over the pto shaft is stripped. It is the sleeve thing that the main drive pulley is bolted to. I am sure this is not enough info on the model, so someone please tell me where to get the info at. Thanks in advance for any help!!!
Kip

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 5:42 am
by randallc
I guess it is according to what kind of pulley you have, if it has a center that fits over the PTO. Is the inside stripped or the PTO. Can you add a picture of what you are talking about.

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 11:03 am
by fpchief
Working off a cell phone so I don't think I can add a picture. I do have pics on the phone though. And yes, it is the inside that is stripped. Thankfully the pto shaft is good to go. Can you send a email I can send pics to??
Thanks for any help.

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 1:48 pm
by Former Member
You can send them to me and I will post them.


Dale

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 4:41 pm
by Former Member
Here are the pics of his sleeve

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 5:01 pm
by LeeC
It looks like a Woods p/n 1506 (aka, Browning H978 10 SPL B hub). Costs a little over $20 from a Woods Dealer.

Re: Pto sleeve for mower deck

Posted: Thu Aug 30, 2012 9:05 pm
by fpchief
That is great. Thank y'all for he help. I will find a woods dealer tomorrow.