Farmall 100 plow question

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 1:16 pm

Plow beam size crop.jpg

I am trying to find out what the model of this plow is and how to make adjustments to it. Possibly a manual? I plan to use this many years and will need to know the ins and outs and also be able to source parts like shares, etc. more pictures to follow.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 1:18 pm

Plow small crop.jpg
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 1:20 pm

Plow board size crop.jpg
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby Jim Becker » Tue Jul 24, 2012 2:48 pm

Probably an A-193. Hard to tell anything from your pictures.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11918
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 7:40 pm

Jim Becker wrote:Probably an A-193. Hard to tell anything from your pictures.

What should be in the pictures? I thought the casting numbers would be the ticket.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby Brendan In NC » Tue Jul 24, 2012 9:05 pm

That looks like a Super A one bottom plow looks to be a 14 inch or 16 inch moldboard not real sure tho
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
User avatar
Brendan In NC
Cub Star!!
Cub Star!!
 
Posts: 405
Joined: Fri Jul 29, 2011 6:54 pm
Location: Greenville N.C
Zip Code: 27858
Tractors Owned: 1964 Farmall Cub Red Square Nose # 223883 one of 2300 built before they switch to Yellow and White. Tractor was nicknamed Oscar by my Grandma and the lil feller is pretty much Tight as can be no wear any where other than that paint being awful! HaHa

1964 Farmall 140 #27512
Just a Clean Strong run of the mill Farmall 140 with very little Wear.

Also have a bit of equipment
Woods C-42 Belly mower, 1963 IH McCormick #215 Plow, IH #144 Cultivators, IH Side Dresser (in need of some work non working at the moment)

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 9:15 pm

It's a 16 inch, butt I'm trying to find out the model number and get my hands on a manual. What was the stock plow for the 100? Is there a better plow for it ? I also am trying to find out what carburetor is on my 100 and get a manual for it as well because I'm not familiar with it and the adjustments.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby Jim Becker » Tue Jul 24, 2012 9:17 pm

FarmallShepherd wrote:
Jim Becker wrote:Probably an A-193. Hard to tell anything from your pictures.

What should be in the pictures? I thought the casting numbers would be the ticket.

The casting numbers would help if I could read them. At the same time, they are in so close I can only guess what the part is.

1) I think it is the beam. The beam for an A-193 (and some variations) is 512504R1. You can check it.
2) Plow bottom and the curved part of the beam. Any bottom IH made could be put on any plow they made. Even if I could ID the bottom, it doesn't help ID the plow. The section of the beam in the picture is just a simple curve, identical to probably dozens of plow models. The only tell in the picture is the chain very far back on the beam. Few models have a chain that far back.
3) Is the number O 3068? I scanned 4 large parts catalogs and found that number is the moldboard on a BBA bottom. Giving us the size of the bottom would help too. I guessed the part may have been the moldboard, but sure couldn't say for sure until I found the number (if that is the number). Even so, as I already said, IDing the bottom is no clue as to the model of the plow.

In brief, don't crop the pictures down to where you can't tell what the part is. Include a picture of the whole plow so we can see the unique parts. Show pictures of the part numbers but read them for us. A straight-on picture of a part number takes out all the relief that you have when the part is right in front of you.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11918
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 9:25 pm

Ok I will do my best, the top picture is the beam it has "12504R1" there are impressions before this but I can't make them out, but they don't look like numbers more like squares. it's a 16 inch plow. The last picture is the back of the moldboard.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 9:27 pm

Whole shot sized.jpg

Here is the whole thing on the tractor
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 9:29 pm

Also the number you have is correct on the mold board.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby Jim Becker » Tue Jul 24, 2012 9:39 pm

OK. It is an A-193, later IDed as simply 193. It has a 16" BBA bottom. The illegible stamp in front of the part of the number you can read has to be a 5. There may be a mal-formed IH in front of the 5.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11918
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 9:45 pm

Thanks! I really appreciate the help. I'm new to all this so I really am thankful for your time and knowledge.
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby FarmallShepherd » Tue Jul 24, 2012 11:36 pm

Also, I have been searching around and have found out that this is a "super chief" bottom? And you told me that it had a "bba" mold board, from what I have found, that is a general purpose? What does"bba" mean? Also, my land side has a one piece molded look, but most pictures I see have a bolt on heel. My land side thickens up in back, but doesn't have a replaceable section, is it for a specific purpose? Can I order new shares/shins for this plow?
FarmallShepherd
 
Posts: 38
Joined: Tue Jul 24, 2012 7:42 am
Location: Dewittville, NY
Zip Code: 14728
Tractors Owned: IH Farmall 100

Re: Farmall 100 plow question

Postby Jim Becker » Wed Jul 25, 2012 8:38 pm

It is not a Super Chief bottom it is a BBA bottom. That bottom was built from '37 to '61. It is a "general-purpose moldboard adapted to stubble and tame hay sod plowing." The landside of that bottom does not have a replaceable heel, even though other bottoms do. Replacement parts for that bottom will probably be a challenge.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11918
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Next

Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 2 guests