Farmall Cub

i want to make my 67 140 as correct as possible. i want to put rear lights on it. i have a bracket for one light but no light.what type of light goes on the rear, and do they have two light or just one , thanks

One light on the rear, I THINK early models like yours were "post"mounted, on the left side behind the seat. I believe later models are "flatback" that mount directly against a sheetmetal bracket on the left fender.

i have a mount on the left side.is that a hookup light similiar to the headlights or is a two way light. in other words with a lens on both sides?

donut wrote:i have a mount on the left side.is that a hookup light similiar to the headlights or is a two way light. in other words with a lens on both sides?

I am thinking the rear light will look like a headlight, but would have a red light in it too. It should be the tail light and red tail light built into one bulb.


Al

thanks i' see if i can find one .

If I am right, the actual bulb is easy. The light shell shouldn't be too hard from some of our board vendors/sponsors.\

Al