Page 1 of 1

Bearings...or what???

Posted: Wed Apr 13, 2011 8:22 am
by BohemianJon
On my 130 I've noticed a "howl" when I'm going down the path in 4th gear that seems to be coming from the left rear wheel. I've checked the fluid level in the lower housing near the draw bar and its OK...the transmission level is also where it should be. What's going on??? Thanks.

Re: Bearings...or what???

Posted: Wed Apr 13, 2011 9:49 am
by Bigdog
Howling is typically a term given with bearing problems. You may have pitted or worn bearings.

Re: Bearings...or what???

Posted: Sun Apr 17, 2011 11:34 am
by BohemianJon
Thanks BigDog...Ive done bearing jobs on autos and trailers but not on tractors. My 130 has rear wheel weights...and I'm not sure how I should tackle this...any step by step recommendations / suggestions? Or, is there someplace I can read the proper instructions of how to do this? I've looked under the Manuals and FAQ and can't seem to find anything. Need some help...Thanks again.

Re: Bearings...or what???

Posted: Sun Apr 17, 2011 4:08 pm
by Bigdog
Since you're dealing with an offset tractor wedge the front axle for stability. I would remove the rear wheel and weight together as a unit. A bit bigger and bulkier but overall easier to maneuver. It's pretty straightforward wrenching.