Tue Mar 08, 2011 7:40 am
I might have goofed up...I filled up the transmission and now get a white/tan colored foam coming up around the shifter arm when working the tractor. What's my problem and what do I need to do to correct. As usual, many thanks.
Tue Mar 08, 2011 8:39 am
Sounds like you have overfilled it. Also, since the foam is tan in color, it sounds like you have moisture in there. It will to be flushed.
Tue Mar 08, 2011 12:11 pm
Thanks Gary...and what is proper procedure to flush it out? Where do I drain it from? How much is in there? What do I use to flush it out? How much do I put in? Thanks.
Tue Mar 08, 2011 12:14 pm
I can't answer your questions, but just checked and Binder Books has the manuals for the 130 in case you want them.
Tue Mar 08, 2011 12:33 pm
You can also look at the Super A Owner's Manual on Rudi's manual server at the top of this page. I'm pretty sure they both use the same transmission.
Tue Mar 08, 2011 1:00 pm
the drain is at the rear of the transmission on the right side. a pipe plug that accepts a 1/2" breaker bar. there will be a level plug about 1 1/2" off the bottom of the trans. i think its on the left front.
Wed Mar 09, 2011 8:05 am
Thanks Guys...appreciate your help and guidance.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.