Could it be a 100?

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Jackman
10+ Years
10+ Years
501 Club
501 Club
Posts: 1816
Joined: Mon May 15, 2006 4:26 am
Zip Code: 000000
Circle of Safety: Y

Could it be a 100?

Postby Jackman » Thu Apr 12, 2007 8:22 am

Looking at a Farmall that is for sale ,it looks like a 100 has the 11 bar grill and same style front rims as 100, but does not have hydralics or any name plates the serial tag is sprayed over so I would have to scrape it to read. It does look alot like an A but some how appears to be just a tad smaller in size and less beefier than a A :? So with out scraping the tag is thaere a way to ID this tractor?

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12140
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu Apr 12, 2007 8:48 am

Next thing smaller than an A is a Cub. Where is the serial number plate attached? You have pictures?

Jackman
10+ Years
10+ Years
501 Club
501 Club
Posts: 1816
Joined: Mon May 15, 2006 4:26 am
Zip Code: 000000
Circle of Safety: Y

Postby Jackman » Thu Apr 12, 2007 9:58 am

Sorry no pics, I think the # plate is in the same spot as a Cub , but I could be wrong the tractor is painted a heavy coat of redish/orange and I trhought the tag was on the bloster like a Cub :? , ... If it is a 100 or an A where should the serial# plate be?

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12140
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu Apr 12, 2007 10:14 am

The A and Super A serial plates were usually on the left seat bracket. Very early A had it on the shield below the pedals. 100 plate was on the bell housing. Cub and offset Lo-Boys are the only ones I know of with it next to the steering shaft/gear.

User avatar
cowboy
10+ Years
10+ Years
501 Club
501 Club
Posts: 3414
Joined: Sat May 15, 2004 11:10 am
Zip Code: 49229
Location: MI, Britton

Postby cowboy » Thu Apr 12, 2007 7:39 pm

I may be off base here but Jim will correct me. A "A" has no provision for hydrolics. So a SA, 100 or 130 should have flat on the trans housing and bolt holes/threads for the T/C unit whether it was ordered with one or not.

Hopfull not confusing the issue

Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.

"Those that say it can’t be done should not interrupt the ones who are doing it.”

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12140
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu Apr 12, 2007 9:32 pm

Cowboy wrote:So a SA, 100 or 130 should have flat on the trans housing
On the top of the bell housing (or torque tube if you prefer) but yes, Super A on up will have provisions for mounting hydraulics.


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 2 guests