Wheel Weights???

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Wheel Weights???

Postby muleboss » Mon Feb 05, 2007 11:01 pm

I have a set of IH wheel weights that I am sure are not cub or A-B. I think they are front .The number stamped on them is 370885R1. Can some one tell me what they fit or where to look for information? Thanks Bob
muleboss
501 Club
501 Club
 
Posts: 741
Joined: Sat Dec 10, 2005 4:31 pm
Location: KS. Burlington
Zip Code: 66839
Circle of Safety Award
Circle of Safety: Y

Postby cjpenny89 » Tue Feb 06, 2007 10:05 am

you can call your local case IH dealer and tell him the part number and he can look it up and it will tell you everything they fit.
at least most of the time they can.
Chad
User avatar
cjpenny89
501 Club
501 Club
 
Posts: 1069
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

weights

Postby t jackson » Tue Feb 06, 2007 8:09 pm

cub front are part no 351371R1 cub rear are part no351374R1 inside are part no 368838R1
User avatar
t jackson
501 Club
501 Club
 
Posts: 875
Joined: Wed Feb 01, 2006 9:36 pm
Location: MD, Westminster
Zip Code: 21157
Circle of Safety Award
Circle of Safety: Y

Postby TJ » Tue Feb 06, 2007 10:23 pm

If they are front weights for the c, h, and m's.They will have 3 bolt holes and 3 nocthes on the outside to fit inside the wheels. I don't know the part #.I just know what they look like.
1972int.cub , c-3 int mower , 54a blade
1950 M farmall "under construction"

If a word is misspelled in the dictionary who would know? from uncle johns bathroom reader
TJ
Cub Star!!
Cub Star!!
 
Posts: 291
Joined: Sun Dec 10, 2006 10:43 am
Location: AR. Pocahontas
Zip Code: 72455

weights

Postby t jackson » Tue Feb 06, 2007 11:24 pm

front weights are part no 6788D for an M tractor
User avatar
t jackson
501 Club
501 Club
 
Posts: 875
Joined: Wed Feb 01, 2006 9:36 pm
Location: MD, Westminster
Zip Code: 21157
Circle of Safety Award
Circle of Safety: Y

weights

Postby t jackson » Wed Feb 07, 2007 4:55 pm

i do not think that is a good part no it should be 370685R1 a 50 lb weight for a 140 amoung others
User avatar
t jackson
501 Club
501 Club
 
Posts: 875
Joined: Wed Feb 01, 2006 9:36 pm
Location: MD, Westminster
Zip Code: 21157
Circle of Safety Award
Circle of Safety: Y

Postby muleboss » Wed Feb 07, 2007 8:38 pm

T jackson . You are probably right about the number. Unless the light is right I sometimes confuse 6 and 8. They look like they would be about the right size for a 140. Thanks for the info. Bob
muleboss
501 Club
501 Club
 
Posts: 741
Joined: Sat Dec 10, 2005 4:31 pm
Location: KS. Burlington
Zip Code: 66839
Circle of Safety Award
Circle of Safety: Y

Postby Jim Becker » Thu Feb 08, 2007 11:00 am

If it is 370685R1, it will have 4 bolt holes for mounting it.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11851
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Postby muleboss » Fri Feb 09, 2007 5:48 pm

Yes Jim it does have 4 holes. Thanks
muleboss
501 Club
501 Club
 
Posts: 741
Joined: Sat Dec 10, 2005 4:31 pm
Location: KS. Burlington
Zip Code: 66839
Circle of Safety Award
Circle of Safety: Y


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest