Linkage rod what is it???

[AL Farmall Boy]

Trying to figure out what this linkage rod goes to, it is approximately 72" long. Maybe a plow? Maybe a disk? Not sure. Seems too short for a steering plow but maybe not.

Maybe it fits another model tractor (Cub, C, Super C ) ??

[John *.?-!.* cub owner]

Looks very similar to the steering rod used on a cub 151 rear mount disc plow. I think it might be a little longer than the one used on a cub though.

[AL Farmall Boy]

I was thinking it was a plow steering rod from the looks of it but didn't think it would be long enough for either. Maybe it is....I've never hooked one up. Might fit the Super A version?

Anyone else??

[John *.?-!.* cub owner]

On a cub that steering rod ran from the right front spindle to a bracket with a pivot arm on it, then a second one that was adjustable went to the rear wheel to steer the back of the plow. I think the Super A used a similar system.

[AL Farmall Boy]

On a cub that steering rod ran from the right front spindle to a bracket with a pivot arm on it, then a second one that was adjustable went to the rear wheel to steer the back of the plow. I think the Super A used a similar system.

Gotcha. So, sounds like it was a 2-piece linkage so to speak.

Anyone know the model of plow that fit the Farmall A and Super A sized tractors so I can possibly look it up in a parts manual or by pictures ? I will also try looking in the Cub 151 parts book.

[John *.?-!.* cub owner]

Not sure, but I think it may be an A161. Very similar to the Cub 151, but was a 2 disc plow.

[AL Farmall Boy]

Not sure, but I think it may be an A161. Very similar to the Cub 151, but was a 2 disc plow.

Sounds good John. Thank you for your help. I'll try searching A-151 and A-161 plows. I looked in the Cub parts/owners manual for the Cub-151 plow and it shows it but doesn't tell how long it is. I guess I'll just have to find someone with a setup like that to measure their rod.

[Jim Becker]

You might try A-251.

[AL Farmall Boy]

Thanks Jim. Will do.

I did find information on an A-151 plow as well, just need to find someone who owns one to measure their rod and match mine up.

[John *.?-!.* cub owner]

You might try A-251.

I am pretty sure Jim has the right number. Mine was both wrong and mistyped.

[AL Farmall Boy]

Can't seem to find anything referencing an A-251 plow. The A-151 plow does show some info though.