This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Farmall 140 PTO Repair

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Heidelburg
5+ Years
5+ Years
Posts: 1
Joined: Sat Jul 01, 2017 2:49 pm
Zip Code: 27028

Farmall 140 PTO Repair

Postby Heidelburg » Sat Jul 01, 2017 9:20 pm

Hello All,

I have just purchased a 1966 model Farmall 140 and the PTO output shaft bearing really needs replacing. I plan on replacing the input shaft bearing and seal while I am in there.

From looking at the breakdown of the parts book it looks to be a fairly straight forward repair but ya'll know that can be deceiving.

I would like to ask the advice of this group if this repair really is straight forward? Are there any helpful hints, special tools, cautions or anything I need to watch for when making this bearing replacement? Will I need a press to press out the bearings? Obviously I have never seen the inside of this PTO before.

I have purchased both output shaft bearings and seal, the PTO input shaft bearing and seal and a gasket kit? Will there be any other items needed if the problem is just the output bearings?

I really appreciate any feedback. Thank you.
Top

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 0 guests