This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- RanchsA
- 5+ Years
- Posts: 130
- Joined: Wed Feb 11, 2015 10:38 am
- Zip Code: 48873
- Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
1976 Cub Cadet 1450
2014 Cub Cadet GT2042 - Location: Mid Michigan
Governor
Okay so we are moving to the governor now. Wondering if there are any wear parts here I should replace while I have it opened up? I'm guessing springs? Anything else? Thanks again randy
-
- 5+ Years
- Posts: 17
- Joined: Fri Jan 08, 2016 9:00 am
- Zip Code: 56544
- Tractors Owned: A Farmall
B Farmall
B Farmall
M Farmall
350 Farmall
4010 John Deere - Location: Frazee MN.
Re: Governor
Replace the thrust Bearing on the end of the shift. Also check for excessive play on the control rod. The bushings may be worn. Make sure weights are freely moving also.
Thanks Todd
Thanks Todd
- RanchsA
- 5+ Years
- Posts: 130
- Joined: Wed Feb 11, 2015 10:38 am
- Zip Code: 48873
- Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
1976 Cub Cadet 1450
2014 Cub Cadet GT2042 - Location: Mid Michigan
Re: Governor
Thanks Todd. Everything else seemed pretty after giving it a bath in the parts washer. I had to make the bumper pin out of some rod. Not sure how but I lost it someplace. I use the one from my spare motor to get measurements. This way I can keep them both as "full" governors. Springs and bearing are on order though. That bearing was a pricey little guy!
Thanks again. Randy
Thanks again. Randy
-
- 10+ Years
- Posts: 552
- Joined: Sat Dec 25, 2010 6:31 am
- Zip Code: 44333
- Tractors Owned: Farmall cub 56-Spartacus
International cub 76
Cub L-F 194 Plow
Cub F38 Disk Harrow
Cub L-F1 Platform Carrier
Cub 54 Leveling Blade - Circle of Safety: Y
- Location: Copley, Oh
Re: Governor
what THolmer suggested!
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 14 guests