Screen for Zenith carb

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
RanchsA
Cub Star
Cub Star
Posts: 125
Joined: Wed Feb 11, 2015 10:38 am
Zip Code: 48873
Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
2014 Cub Cadet GT2042
Location: Mid Michigan

Screen for Zenith carb

Postby RanchsA » Sat May 09, 2015 8:33 am

Hi. I noticed my governor surging a bit a few days ago after adding some sea foam to my tank of fuel. Now the A will run weak at full choke. I'm thinking my carb is gunked up again. I didn't have a screen in my carb or any luck finding one. Was planning on cleaning out the carb again but would like to get a screen in there to hopefully stop some gunk from from getting through. Anyone know a place to find these screens?

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22116
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Screen for Zenith carb

Postby John *.?-!.* cub owner » Sat May 09, 2015 9:27 am

I will get the link for Zenith parts when I am in the shed a little later, but in the mean time you may want to look at this.
viewtopic.php?f=139&t=38266
If you are not part of the solution,
you are part of the problem!!!

Bob McCarty
Team Cub
Team Cub
Posts: 8225
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Screen for Zenith carb

Postby Bob McCarty » Sat May 09, 2015 10:33 am

You might check with McDonaldCarb.com for the screen.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 2564
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Screen for Zenith carb

Postby Dale Finch » Sat May 09, 2015 8:39 pm


Daniel H.
10+ Years
10+ Years
Posts: 606
Joined: Mon Feb 03, 2003 1:18 pm
Zip Code: 27055
Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35
Circle of Safety: Y
Location: NC, Yadkinville

Re: Screen for Zenith carb

Postby Daniel H. » Sat May 09, 2015 11:33 pm

My IH dealer lists this at $47 and change. I thought steiner was high at $25. 10 years ago they were under $10.
The four most expensive words in tractor restoration: "We might as well..."

User avatar
RanchsA
Cub Star
Cub Star
Posts: 125
Joined: Wed Feb 11, 2015 10:38 am
Zip Code: 48873
Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
2014 Cub Cadet GT2042
Location: Mid Michigan

Re: Screen for Zenith carb

Postby RanchsA » Mon May 11, 2015 9:40 am

Thanks for the replies everyone, sorry I wasn't able to respond this weekend time and my internet were not working with me. I'm definitely going to look into making one per the thread you posted John. The previous owner has a copper line installed ,and it will give me a reason to play with Dad's bender. I may grab one from Steiner in the mean time to get her going again for a quick run finish up on the garden. Those little buggers are more than I was expecting as well. I was expecting more of the 10 or under point myself.
Once again thanks all for the replies.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 3 guests