This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Work Lamp.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 31
- Joined: Tue May 06, 2014 2:45 am
- Zip Code: 2794
Work Lamp.
Hi. I am putting an order together and was wondering if the rear work light where the same as the front headlights when new? not sure if the red dot light in the clear work light was factory spec. These may sound like basic questions but if you don't know you only find out if you ask. thanks.
-
- Team Cub
- Posts: 17240
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Work Lamp.
The combination lights, even in the years they were available, were an option. The standard rear light, if you even had lights, was the same as the front lights.
-
- 5+ Years
- Posts: 31
- Joined: Tue May 06, 2014 2:45 am
- Zip Code: 2794
Re: Work Lamp.
Thanks Jim. My tractor has the rear work bracket still in place but no light same for the front.
I was going to order a 4 position switch which has been removed in the past, would this be correct for a rear work lamp with a red tail lamp bulb? still 6 volt with a reg. and generator.Parts are not cheap to ship to Australia and don't want to stuff it up. Thanks.
I was going to order a 4 position switch which has been removed in the past, would this be correct for a rear work lamp with a red tail lamp bulb? still 6 volt with a reg. and generator.Parts are not cheap to ship to Australia and don't want to stuff it up. Thanks.
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Re: Work Lamp.
The four posistion is for a generator with a cut-out. The three posistion is for a generator with a voltage regulator. The rear light comes on with the headlights. The one with a red tail lamp had a switch on the lamp for red/white/off.
The four most expensive words in tractor restoration: "We might as well..."
-
- Team Cub
- Posts: 17240
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Work Lamp.
Yeah, what Daniel said about the 3 and 4 position switches. They changed during Super A production, about 1950.
-
- 5+ Years
- Posts: 31
- Joined: Tue May 06, 2014 2:45 am
- Zip Code: 2794
Re: Work Lamp.
Thanks. Mine has a reg. fitted just below the generator, saved a mistake so I will go with the 3 position headlight switch the serial is #312014 S.AV. which is I think is about mid. 1951. Thanks Brian.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 5 guests