Recently acquired a Super A that is needing a total engine rebuild. I've been trying to remove the front end and just roll it away and can't figure out how to hold the nut on the back of the bolt that is inside the steering assembly. The bolt/nut is on the hydraulic pump side of the engine. I found the hole in the front but a socket won't fit through the hole. Also trying to understand how I would hold the nut to start it back when I put it back together (if I ever get it off!). Any suggestions?
Thanks, Brad
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Removing front axle bolster assembly
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 81
- Joined: Wed Feb 13, 2008 6:34 pm
- Zip Code: 36793
- Location: AL, Lawley
-
- 10+ Years
- Posts: 81
- Joined: Wed Feb 13, 2008 6:34 pm
- Zip Code: 36793
- Location: AL, Lawley
Re: Removing front axle bolster assembly
Got the nut off the bolt. Put a big pry bar in the hole to wedge the nut enough to get the bolt loose. Still haven't figured out how I will get it back on but will cross that bridge when I get there. Maybe a magnet will hold it enough to get it started.
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Removing front axle bolster assembly
We are about to remove the front casting also. Got one that has a cracked steering gear housing. Got a good tight one and it will be easy to just remove the whole axle and bolster and replace it all. The sad part is....the tractor with the cracked housing has good tight steering.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Removing a Super A Radiator
by PoconoCub » Tue Apr 27, 2021 2:23 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 398
-
by PoconoCub
Tue Apr 27, 2021 8:39 pm
-
-
-
Front PTO for 130/140
by inairam » Mon Jun 07, 2021 6:45 am » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 368
-
by tst
Sun Jun 13, 2021 9:44 am
-
-
-
Front receiver hitch
by Lt.Mike » Sun Jun 20, 2021 12:47 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 418
-
by Lt.Mike
Sun Jun 20, 2021 6:34 pm
-
-
-
Farmall 140 Front reservoir Attachment(s)
by Rob8423 » Thu Feb 03, 2022 9:13 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 344
-
by SamsFarm
Sat Feb 05, 2022 12:47 am
-
-
- 2
- 224
-
by SamsFarm
Mon Mar 14, 2022 1:22 pm
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests