I'm in the process of finishing (only been about a year "finishing") the Fast Hitch conversion on my Super A. All that is left is to hook up the helper spring. The problem is I can't get the holes to line up on the side of the torque tube. Now, I assume I am doing it right--I am inserting the "tab" on the back of the helper spring bracket into the little hole on the side of the torque tube, where the transmission connects to the torque tube. I tried tightening the spring as tight as it would go to shorten it so it would miss the touch control rockshaft and allow me to try to line the holes up but I couldn't get it short enough--and once I did I am not 100% sure the spring would work like it should without actually bending.
The only thing I can think of that might be the problem--assuming I am trying to attach it correctly-- is the tab on the helper spring bracket. The original had been broken and a new one welded in place. It looks just like the original, but I am beginning to wonder if maybe it's too long.
Any suggestions? Am I trying to hook it up right?
thanks,
Al
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Help attaching fast hitch helper spring on Super A
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Super A
- 10+ Years
- Posts: 5231
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Help attaching fast hitch helper spring on Super A
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- Brendan In NC
- 10+ Years
- Posts: 440
- Joined: Fri Jul 29, 2011 6:54 pm
- Zip Code: 27858
- Tractors Owned: 1964 Farmall Cub Red Square Nose # 223883 one of 2300 built before they switch to Yellow and White.
1964 Farmall 140 #27512
Just a Clean Strong run of the mill Farmall 140 with very little Wear.
Also have a bit of equipment
Woods C-42 Belly mower, 1963 IH McCormick #215 Plow, IH #144 Cultivators, IH Side Dresser (in need of some work non working at the moment) - Location: Greenville N.C
- Contact:
Re: Help attaching fast hitch helper spring on Super A
if the little tab has been broken an another has been welded on to it just cut or file it down until it works the way it should.
anything that makes is shorter. ill go look on my 140 just to see! it has one as well.
anything that makes is shorter. ill go look on my 140 just to see! it has one as well.
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
- Super A
- 10+ Years
- Posts: 5231
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Help attaching fast hitch helper spring on Super A
The new one bottoms out in the hole. The whole "arm" that runs from the helper spring bracket, beside the battery box to the back of the torque tube, had been broken off, they made a new one and welded it on. It looks "just right" but I am beginning to wonder.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 14 guests