Trick to removing inside, left hand TC arm?

Sun Feb 03, 2013 10:36 am

Working on finishing the fast hitch conversion for Old Ugly. Trying to get the inside touch contorl arm off, on the left side, so I can add an arm that will accept the helper spring. Outside one popped right off but the inside one is not interested in budging. Tried tapping on it with a hammer, left it soaking in penetrating oil. Anything I am missing?

Thanks
Al

Re: Trick to removing inside, left hand TC arm?

Sun Feb 03, 2013 10:41 am

It is made to the rock shaft

Re: Trick to removing inside, left hand TC arm?

Sun Feb 03, 2013 10:42 am

I think

Re: Trick to removing inside, left hand TC arm?

Sun Feb 03, 2013 2:49 pm

Took me a while to find the photos, but I do believe that Boss once again is correct!
From the manual:
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20234.jpg
You do not have the required permissions to view the files attached to this post.

Re: Trick to removing inside, left hand TC arm?

Sun Feb 03, 2013 5:44 pm

Thanks! This is gonna be a little tricker than I thought....

Al

Re: Trick to removing inside, left hand TC arm?

Wed Feb 06, 2013 1:34 pm

Do you have the arm with the helper spring boss on it?

Re: Trick to removing inside, left hand TC arm?

Wed Feb 06, 2013 1:37 pm

That is what he needs, he is looking for one