Farmall Super A, AV, 1939 - 1954
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
The Super AV is coming along. I wanted to get some paint work done first on the tractor but I needed it to be ready to cultivate very soon so that probably will be done this fall. I did replace the front tires. They were shot. I had to rebuild the mouting frame for the cole side dresser. There was nothing left to it but I did use the mounting plate. Once that was done along with other paint work, I was able to start the assembly. Basiclly, 80% there. The Cole drive mechanism just needs some paint and mounted up and the drive sprocket assembly for the rear final has yet to be cleaned up and painted. I have most of the rear cultivator assembly but need a left side bracket assembly to mount the cultivator arm on. I could not find the long rear arms for an AV locally so I have a standard set I need to extend. I found two NOS Cole fertilizer assemblies and drives in CO which I got shipped to me with Ray Durban's help. Joe Brewer sold me the Super AV belly mount cultivator arm assembly. Clint Carter and Richard (from TN) got them to Boss's. Bob Perry got them from Boss's to me. Boss and I traded some parts for the flat spring style cultivators. I think that's everyone. I must thank everyone for their involvement in either selling me or getting many of the parts to me that put this cultivator together as a complete unit.
Last edited by tractordad on Tue Aug 07, 2012 2:26 pm, edited 1 time in total.
Looks great. Now hit the field.
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
I believe I have (2) pair of the rear high crop cultivator spring rods. What are the original dimensions? They are much longer than the standard ones, and I couldn't imagine what else they'd fit.
I will check. I believe I have a pair that are correct. Thanks
Spent some time on the tins the past week. Came out ok but I wouldn't want anyone to ask me to paint their car. Did a little electrical work but still have a charging issue. Need to bench the generator and tear it down. I have nothing left to replace.
nice tractor you have there.
May I ask why the front and rear wheel spacing is so wide? Since these tractors were used to cultivate 1 row at the "normal" wheel spacing, I wouldn't know why you'd want it so wide.
That is a very nice and straight SAV you've got. I sure would LOVE to run across an Offset High Crop to use in my garden!
I actually purchased it at the curent spacing. I do want to narrow it up but need more that myself to change the rear around.
This tractor and a high wide cub
gary, what day are you going ?
Hope to see you both there.This year I need to get out of the vendor area long enough to look at some tractors.
Rob-Saturday is usually the busiest day(with the most tractors)as many folks arrive early AM then load up and leave late afternoon.
How can you have too many Cubs????
Nice Job !
Member Chapter 42 IHCC
1970 Farmall Cub
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
Early Saturday morning for most of the day.
Who is online
Users browsing this forum: No registered users and 2 guests