I have a super A that has bad final drives because someone broke the castings around the draw bar bolt holes.
The other day I found a good deal on some 140 final drives, now I am hoping someone could tell me if these will bolt right up to the super A.
These drives I got are complete with axle shafts and everything inside will I be able to bolt them right on or not? or did I just buy two boat anchors
Thanks,
Zack
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
super a final drive
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
-
- 10+ Years
- Posts: 393
- Joined: Tue Nov 21, 2006 12:39 pm
- Location: Blountville, TN.
Re: super a final drive
I'm sure someone will be able to tell you for sure, but I am going to take a guess and say that they will bolt right on, good luck
Mike
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: super a final drive
Isn't the farmall A, the farmall super A, the farmall 100, the farmall 130 and the farmall 140 just all the same as the farmall A when it comes to the basic tractor tranny and finals? There all related right? (samey/same)
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 122
- Joined: Fri Jan 06, 2006 9:48 pm
- Location: Grand Haven, Michigan
Re: super a final drive
Thats what I was thinking when I bought them. I want to put new seals in them but I don't have the time to put them on right now. So I was going to reseal them and get them ready for the restoration. I was hoping someone would know for sure before I put any more money into them.
Thanks,
Zack
Thanks,
Zack
-
- 10+ Years
- Posts: 272
- Joined: Fri Apr 03, 2009 11:37 pm
- Zip Code: 00000
Re: super a final drive
....
Last edited by JoeB on Sun Aug 07, 2011 10:32 pm, edited 2 times in total.
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: super a final drive
I think the dowels are a different size. abd the brakes are differeny if you have an early SA
BOss
BOss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 11 guests