This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

supers A steering rod bushing

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
bear32055
10+ Years
10+ Years
Posts: 792
Joined: Mon Nov 26, 2007 5:55 pm
Zip Code: 62258
Tractors Owned: 3-1955 FCubs serial numbers 191155,191156 and 191158
1958 fcub
Circle of Safety: Y
Location: IL,Mascoutah
Contact:

supers A steering rod bushing

Postby bear32055 » Sat Jul 05, 2008 2:23 pm

I am replacing the oil seal in the steering box and would like to replace the bushing as well but not sure how to remove it.I assume it comes out towards the rear of the box and not the front but i need to know before i start.Thanks in advance as always. BEAR

SPONSOR AD

Sponsor



Sponsor
 

Daniel H.
10+ Years
10+ Years
Posts: 613
Joined: Mon Feb 03, 2003 1:18 pm
Zip Code: 27055
Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35
Circle of Safety: Y
Location: NC, Yadkinville

Re: supers A steering rod bushing

Postby Daniel H. » Sun Jul 06, 2008 4:38 pm

I assume you are talking about item number 7 & 8. If so, drive it out the back. Don't forget number 21&24 as well I had to use two seals at number 24, with some grease packed between them to stop mine from leaking. You can click the image to make it bigger.


Good luck.

Daniel
Attachments
superasteering (Small).gif
The four most expensive words in tractor restoration: "We might as well..."

bear32055
10+ Years
10+ Years
Posts: 792
Joined: Mon Nov 26, 2007 5:55 pm
Zip Code: 62258
Tractors Owned: 3-1955 FCubs serial numbers 191155,191156 and 191158
1958 fcub
Circle of Safety: Y
Location: IL,Mascoutah
Contact:

Re: supers A steering rod bushing

Postby bear32055 » Thu Jul 10, 2008 8:35 pm

thanks for the info.i got it done ,drove it around for about half hour and is good as new


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 9 guests