This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Piece by Piece
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Looking really good! What paint and primer did you use? How did you apply it? Is that a Super A?
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- 10+ Years
- Posts: 3182
- Joined: Fri Jun 02, 2006 1:57 pm
- Zip Code: 30145
- eBay ID: 9716ron
- Location: Ga, Kingston
-
- 10+ Years
- Posts: 61
- Joined: Thu Nov 30, 2006 8:31 pm
Yes it is a 1950 Super A.
All parts that would come off were powder coated. It's a little more than (good) paint, and a strong finish. The body was painted with Du Pont Chroma One auto paint. They used a scanner to get the color, and it is dead on. I went to Harbor Ft. and bought a $39.99 gravity spray gun on sale for $9.99. Mixed a reducer and activator with the paint. The primer is Tractor Supply oil metal primer. I tested an area with a brush, and it flowed so good the only brush mark was where a piece of the brush stuck to the body. Did the whole body with a brush. The qt. of red paint ( hold on to your hats) was $115.00. I got it for cost.
Still working on getting it started. putting new plugs and fresh gas in. I'll let you know how it goes.
All parts that would come off were powder coated. It's a little more than (good) paint, and a strong finish. The body was painted with Du Pont Chroma One auto paint. They used a scanner to get the color, and it is dead on. I went to Harbor Ft. and bought a $39.99 gravity spray gun on sale for $9.99. Mixed a reducer and activator with the paint. The primer is Tractor Supply oil metal primer. I tested an area with a brush, and it flowed so good the only brush mark was where a piece of the brush stuck to the body. Did the whole body with a brush. The qt. of red paint ( hold on to your hats) was $115.00. I got it for cost.
Still working on getting it started. putting new plugs and fresh gas in. I'll let you know how it goes.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests