Just working on my '52 Super A and wanted to check timing and discovered I could not find timing marks.
Thanks for any help.
Oscar
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super A timing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 237
- Joined: Wed Jul 09, 2003 11:03 am
- Location: Danville, Indiana
Super A timing
48 CUB & 52 Super A
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
It is on the flywheel. Take the cover off the hand hole on the bottom side of the bell housing. It will be on the outer surface of the flywheel and will probably be marked "DC 1-4". You are at TDC when the mark is in line with a rib cast into the cover in front of the flywheel.
Not easy to find. Once you do find it, you may want to dab a bit of white paint on to make it easier to see.
Not easy to find. Once you do find it, you may want to dab a bit of white paint on to make it easier to see.
-
- 10+ Years
- Posts: 227
- Joined: Sun Jul 30, 2006 10:55 pm
- Location: okla
I've got a 48 super a that does not have the marks. I've had the flywheel off and inspected it real good. My 52 has the marks. Take the #1 plug out and put your finger on the hole and hand turn it till you feel the air pushing out the hole at top dead center. Look and see where the rotor is at on your dist cap. Should be pointing to #1.
-
- 10+ Years
- Posts: 237
- Joined: Wed Jul 09, 2003 11:03 am
- Location: Danville, Indiana
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 5 guests