Finally got around to finishing up the 3-pt. hitch on the Super A. Built it mostly from parts I got from Redland Hill on eBay and from the local Tractor Supply Company, with a bunch of fabrication required for the top link mount point. I think it came out ok! Next up, the AC generator mount for the Cub - the driveshaft is complete and the pulleys are mounted, now I just need to figure out where to put it.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
My new homebuilt 3-point hitch...
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
My new homebuilt 3-point hitch...
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Thanks Jostev,
Now, I just need a 3-point *implement*! :D:D
Now, I just need a 3-point *implement*! :D:D
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Looks good Allen - Like Merlin said, add a sway bar or some chains. You don't want those pretty straight arms wrapping around a tire.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Oops, I forgot to show the chains. It's hard to see them, but in the center of each lower arm is a big "U" hook already installed, and I'm making the tabs to put the chains into on the final drives.
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Cub Pro
- Posts: 2575
- Joined: Mon Feb 03, 2003 5:25 am
- Zip Code: 37774
- Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
1 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill - Circle of Safety: Y
- Location: TN, Loudon (near Knoxville)
Hey Allen... NICE JOB Once you get the sway chains mounted you'll have SAVED about $500.00 (the price for most after-market 3-point hitches)...NICE FEELIN' AIN'T IT Of course those "savin's" will be eaten up right away on the purchase of NEW 3-point implements, BUT...that's why you made it in the FIRST PLACE
"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"
"Tennessee Sun-Dried Possum...Heaven In A Can"
- allenlook
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
- Contact:
Hmmm, one question.
A lot of the kits come with a beefy bar at the top that's U-bolted to the stock swaybar tube... I didn't bother to do that, do I need to worry about that tube getting bent?
A lot of the kits come with a beefy bar at the top that's U-bolted to the stock swaybar tube... I didn't bother to do that, do I need to worry about that tube getting bent?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
personally I think you will be fine, unless you plan on really really yanking on somthing... that's just me tho
Johnny
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 13 guests