Page 1 of 1
Oil level taps
Posted: Fri Feb 24, 2006 1:21 am
by W6NZ
in a Farmall A sump. Both mine are broken off on the outside therefore I can't check the oil levels, the only way that I can check is to completely drain the sump and add five litres.
Can anyone tell me if there is a repair kit for these.? I don't want to have to buy a whole sump if I can avoid it.
Thanks for any help.
Posted: Fri Feb 24, 2006 7:07 am
by Virginia Mike
They show up on ebay every now and again. Are yours broken off and the holes welded up, or just missing and plugged?
Best,
Mike
oil
Posted: Fri Feb 24, 2006 7:32 am
by LiL' Red
If you are not concerned about the originality, and the threads are still there, just pick up a couple radiator drain cocks.
Posted: Fri Feb 24, 2006 9:48 am
by WKPoor
Case IH sells plain old drain cocks as replacement for the original.
Posted: Fri Feb 24, 2006 11:11 pm
by W6NZ
Thanks guys appreciate your help, mine are broken off but I can screw them out from the inside. I'll try and get the Case IH radiator drain cocks .
Cheers,
David
Re: Oil level taps
Posted: Sat Feb 25, 2006 4:19 am
by Merlin
W6NZ wrote:in a Farmall A sump. Both mine are broken off on the outside therefore I can't check the oil levels, the only way that I can check is to completely drain the sump and add five litres.
Can anyone tell me if there is a repair kit for these.? I don't want to have to buy a whole sump if I can avoid it.
Thanks for any help.
Try here.
http://www.waltstractors.com/acatalog/o ... _cock.html
Posted: Sat Feb 25, 2006 3:34 pm
by W6NZ
Many, thanks, Merlin, what a great site and right on the page that I wanted.
I have to say that I'm so impressed with the calibre of guys/gals on this forum everyone is so friendly and helpful. If anyone is planning a trip "down under" at anytime, now or in the future, you would be very welcome in our home.
Apart from the decals for the FC-C, I have been able to get the other bits and pieces that I needed plus tee shirts and caps ,
I.H. of course, lol, from company/s in America and the service and speed of delivery has been fantastic.
A Big Thank you to you all.
Posted: Sat Feb 25, 2006 6:57 pm
by Cub-Bud
Here is a link to a Ebay auction for a pair for a H. A quick check in my parts book verfies they will work on the A.
http://cgi.ebay.com/FARMALL-H-OIL-PAN-VALVES-PETCOCKS_W0QQitemZ7593751174QQcategoryZ50920QQrdZ1QQcmdZViewItem
Posted: Sun Feb 26, 2006 3:03 pm
by W6NZ
Great ,thanks CB
never tried EBay before, always a first time
Posted: Sun Feb 26, 2006 7:56 pm
by beaconlight
W6NZ If you run into an Epay that won't ship out of the USA send it to me and I will forward it to you.
Bill
Posted: Sun Feb 26, 2006 11:02 pm
by W6NZ
Cheers Bill, a great offer, thankyou, I'll PM you.
David.