I got the coulter on beam 1 to work. But can't remove either the bolt holding the coulter to the fork or the bolt holding the fork on to the bracket on the 2nd beam. I don't have a torch so I'm thinking I might use a cut off wheel on my 4" grinder. What else might work?
Another question is after removing them I want to replace all the hardware with new bolts and nuts but don't know where to get square headed ones. Would Fastenal have them or tractor supply?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
A-295A Coulter problem!?!?!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: A-295A Coulter problem!?!?!
The reason I needed to remove coulters is the grease in em hardened and coulters were frozen.
- Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: A-295A Coulter problem!?!?!
McMaster-Carr has square nuts and bolts.
Every home is a school, what are you teaching?
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: A-295A Coulter problem!?!?!
Thanks, got tomorrow off n will try getting those bolts out n see about getting the hardware...
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: A-295A Coulter problem!?!?!
Here is some pictures, note how bolts are mushroomed or bent.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 4 guests