60 grader blade boomerang Hydraulic Extension Arm

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
48Cub48SuperA
Posts: 18
Joined: Tue May 15, 2018 10:34 pm
Zip Code: 48821

60 grader blade boomerang Hydraulic Extension Arm

Postby 48Cub48SuperA » Thu May 24, 2018 10:19 am

Anyone have a spare 60 grader blade boomerang Hydraulic Extension Arm. I found one but it seems a bit pricey.
Attachments
IHS-508 Half thick- 2 in wide-2-1-16 and 2-1-8.jpg
IHS-508 Half thick- 2 in wide-2-1-16 and 2-1-8.jpg (18.61 KiB) Viewed 534 times

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 4237
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'56 Cub "Boris"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: 60 grader blade boomerang Hydraulic Extension Arm

Postby Dale Finch » Thu May 24, 2018 8:16 pm

I had to make one for mine. Borrowed one from a friend, traced it, and cut it out of stock, when I took a welding class. Not sure what that would have cost to make or have made outside that class.

User avatar
Shane N.
501 Club
501 Club
Posts: 4356
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 00000
Tractors Owned: .
1975 International Cub
1970 International 140 (Norman)
1972 International 140 (Keeferdoodle)
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original

Sold Cubs..
1947 Cub #1447 (Arnold)
1949 Cub (Walt)
1950 Cub (piece of junk)
1952 Cub
Circle of Safety: Y
Location: N.C.

Re: 60 grader blade boomerang Hydraulic Extension Arm

Postby Shane N. » Fri May 25, 2018 5:20 am

Dale, did you have to make it 3 pieces and weld it together or were you able to heat it and bend it?
Every home is a school, what are you teaching?

Circle of Safety

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 4237
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'56 Cub "Boris"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: 60 grader blade boomerang Hydraulic Extension Arm

Postby Dale Finch » Fri May 25, 2018 5:45 am

It was cut from a "sheet" of steel (obviously I know little about steel terminology!!). The instructor was showing us how to use a laser cutter, so I made something I needed. He gave us a lot of leway, since it was welding for "artists", not to get certified. Good thing, too, since I needed to do a fair amount of grinding to smooth out the rough edges!

Bob McCarty
Team Cub
Team Cub
Posts: 9701
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 60 grader blade boomerang Hydraulic Extension Arm

Postby Bob McCarty » Fri May 25, 2018 8:28 am

Dale, Laser or plasma?
"We don't need to think more,
we need to think differently."
-Albert Einstein

48Cub48SuperA
Posts: 18
Joined: Tue May 15, 2018 10:34 pm
Zip Code: 48821

Re: 60 grader blade boomerang Hydraulic Extension Arm

Postby 48Cub48SuperA » Fri May 25, 2018 10:05 am

Dale Finch wrote:I had to make one for mine. Borrowed one from a friend, traced it, and cut it out of stock, when I took a welding class. Not sure what that would have cost to make or have made outside that class.


Dale, Can you give me the dimensions of this. More like length on the inside to the bends. I think I can make it out of 3 pieces welded together.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest