Page 1 of 1

Making 23-A Rear Gang Set

Posted: Thu Sep 08, 2011 6:55 am
by Stanton
My 23-A disc harrow didn't have the rear gang set when I bought it last year. So, with some help, I received the dimensions and fabricated the set.

Don't have a torch, so fired up the grill...
001.JPG


Then, got out my hammer, vise and welding gloves...
005.JPG


Added the bar stock (1/4" x 1-1/2")...
006.JPG


Waited about 5-10 minutes and put it in the vise. Hammered one way...
007.JPG


Then the other...
008.JPG


Dipped it in a bucket of water, dried it off, and downstairs to the shop for measuring, drilling and fitting...
010.JPG


009.JPG


012.JPG


014.JPG


All complete and assembled on the disc...
021.JPG


022.JPG


Still need to get the stabilizing bar on the rear set, but that'll have to wait 'til later.

Here are the dimensions for the gang bar and clevis set:

Dimensions.jpg


Hope this helps.