How to make a sickle mower blade guard
Posted: Mon Jul 07, 2008 7:57 pm
items needed:
tin snips or some type of cutting tool
5' x 4"dia corrugated plastic flexible drain pipe (price under $5.00)
Directions:
1. measure you cutter bar and cut the pipe to length
2. cut a thin straight slit along the entire length of one side of the pipe.
3. snap it on the teeth.
tin snips or some type of cutting tool
5' x 4"dia corrugated plastic flexible drain pipe (price under $5.00)
Directions:
1. measure you cutter bar and cut the pipe to length
2. cut a thin straight slit along the entire length of one side of the pipe.
3. snap it on the teeth.