Donny asked for pictures and Rudi asked for a "How To," so here goes.
I was getting an L-54 blade disassembled and ready for storage (for a while) before Cub Express shipment to Georgia. I had placed the blade on a furniture mover with the concave side up. Since I had another blade to store, for myself, and necessity is the mother of invention I built a Blade Cart out of an old bed frame and four leftover casters. The cart is one inch longer in each dimension (L & W) than the blade. The rascal looks like this:
This is the detail of the caster placement. Notice the ring welded between the casters. I will use this to keep the hook in place when I load the cart and blade on a tilt bed trailer.
This is what it looks like when it is all loaded up.
Boy does it work slick. Sure beats moving the blade the hard way.
I used angle iron but wood would work as well. Hope this helps others out.
How to fix them and how to use them.
Moderators: Stanton, Team Cub
1 post • Page 1 of 1
- Team Cub
- Posts: 7969
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
- Circle of Safety: Y
- Location: OH, Madison
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
- Similar Topics
- Last post
by ricky racer
Thu Dec 21, 2017 8:47 pm
Sat Oct 21, 2017 4:22 pm
Sun Jun 28, 2015 8:08 am
Fri Mar 18, 2016 10:27 am
Mon Sep 12, 2016 1:12 pm
Who is online
Users browsing this forum: No registered users and 0 guests