metal forming

Tips and tricks on repairs to your Cub’s structure.

Moderators: Barnyard, Team Cub

metal forming

Postby lloyd430 » Thu Aug 25, 2005 8:22 pm

Hey guys here is a little trick, for pounding out some of the dents when you are working on stuff. The biggest problem with pounding back out a dent is distortion, so place your object in sand or pea stone then hit it, this adds support to the other side so that it doesn’t twist and distort :D . Using this method you don’t have to use a piece of wood to buffer- the hammer works fine and you will be amazed at the control you gain! (plus I get to tell my son that "he helped daddy" for letting me use his playground to work in, when your 2 1/2 helping dad is a big deal) :wink:

Just thought I'd share some back,
Lloyd430
1947 Farmall Cub, SN 9920
lloyd430
5+ Years
5+ Years
 
Posts: 130
Joined: Wed Aug 03, 2005 8:30 am
Location: Cato, Central NY

Return to Frame/Sheet Metal

Who is online

Users browsing this forum: No registered users and 1 guest