Tips and tricks on repairs to your Cub’s structure.
Moderators: Barnyard, Team Cub
1 post • Page 1 of 1
- 5+ Years
- Posts: 545
- Joined: Thu Dec 25, 2008 2:44 pm
- Zip Code: 07461
- Tractors Owned: 1957 Cub, 1951 Cub, 198? JD 500C, 1954 Oliver OC3
- Location: NJ, Sussex County
Hey Folks!! Billy Maze here (name changed to protect the innocent (me)) with another new product. Forget the "Kaboom", "Super Putty" or "Hercules Hooks", we know offer the amazing new "Waller Wonder". This is not your ordinary shrink tubing that you can get at Radio Shack . This is our own special material .
Are you tired of metal on metal rubbing in vital areas and causing the unsightly "Wallered " out holes. Have you or are you restoring a tractor and don't want paint on paint rubbing?
Does your dash now look like this and you want that patched up hole to stay round?
Here is the amazing "Waller Wonder" in clear and red. We will use the clear on this Cub!
Cut your pieces to the desired size
"Waller Wonder" can be tough to slide around corners so wet it and apply a little liquid soap. Then make darn sure to remove the soap and any moisture before securing it in place. Here are the 3 locations where we will use "Waller Wonder" on a throttle rod.
Now go and fetch your favorite heat gun and put it to work on "Waller Wonder"
Now look at "Waller Wonder". You can barely tell it is there but it will protect against that horrible rubbing (at least until it wears out and needs replacing )
Smaller versions of "Waller Wonder" even work in other places like this!!!
Ofcourse this product will be great on starter and choke rods as well!! So folks, don't forget to order your "Waller Wonder", do it today and we will double the quantity absolutely free (just pay ridiculous shipping and handling).
I know a little about everything and alot about nothing....
- Similar Topics
- Last post
Sat May 31, 2014 6:20 pm
Thu Dec 18, 2014 11:20 am
by iosco cub
Fri Jul 25, 2014 7:52 am
by John *.?-!.* cub owner
Sat Nov 01, 2014 8:01 pm
Wed Jun 17, 2015 11:54 am
Who is online
Users browsing this forum: No registered users and 0 guests