Repairing Pancake Style Housings with a Custom Nylon Contact
Posted: Tue Feb 07, 2006 8:07 pm
Turned these up on the lathe, any durable plastic will do, I used nylon. The dimensions are, from the screw head end:
.600 for.250
.815 for.090
.950 for.090
.650 for.250
Drill .328 hole, insert 10-24 coupling nut, use two 10-24 x 3/8 screws.
Use the original locking clip on the inside of the light.
.600 for.250
.815 for.090
.950 for.090
.650 for.250
Drill .328 hole, insert 10-24 coupling nut, use two 10-24 x 3/8 screws.
Use the original locking clip on the inside of the light.