--------------------------------------------------------------------------------
While I'm in a picture taking mood here's another of today's projects.
After the torch welding of the patch is complete it will be ground flush and trimmed to exact width to line up with the original at each end. Then the new notches will be filed in at 1/4" spacing. Usually it's necessary to also repair a worn notch in the lever but in this case the lever seems to be a recent replacement.
Here's a completed one that was done earlier for another tractor.
Saving worn parts from the scrap pile becomes easier with practice.
_________________
George Willer
http://members.toast.net/gwill/
If you have a task to do
and mean to do it, really,
never let it be by halves,
but do it fully-freely... Clarence Topel
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How To Repair a Worn Throttle Quadrant
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
How To Repair a Worn Throttle Quadrant
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Who is online
Users browsing this forum: No registered users and 3 guests