How To Repair a Worn Throttle Quadrant

Tips and tricks on repairs to your Cub’s structure.

Moderators: Barnyard, Team Cub

How To Repair a Worn Throttle Quadrant

Postby George Willer » Thu Nov 09, 2006 8:50 pm


While I'm in a picture taking mood here's another of today's projects.



After the torch welding of the patch is complete it will be ground flush and trimmed to exact width to line up with the original at each end. Then the new notches will be filed in at 1/4" spacing. Usually it's necessary to also repair a worn notch in the lever but in this case the lever seems to be a recent replacement.

Here's a completed one that was done earlier for another tractor.


Saving worn parts from the scrap pile becomes easier with practice.

George Willer

If you have a task to do
and mean to do it, really,
never let it be by halves,
but do it fully-freely... Clarence Topel
George Willer

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
CubPro Emeritus
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Return to Frame/Sheet Metal

Who is online

Users browsing this forum: No registered users and 0 guests