I've been cleaning up the nuts and bolts, priming them and re-using them ever since I started this project. Unfortunately this is a slow process and took a lot of my time.
Last night my wife gave me her antique strainer from the kitchen, this may very well be the best tool in my arsenal...
Here's what it looks like.
And here's what I've been doing with it ever since...
1) Put in your slimy bolts, washers, nuts etc.
2) Put them in the parts washer and run the brush around like you're running a dish washer.
3) Check out your squeaky clean hardware...
4) Time for the sand blaster. Shake the strainer around like you're popping popcorn while you blast. 30 Seconds should do it.
5) Here's the end result...
6) Now put them in your handy bolt painting jig. I bent this out of a piece of pipe hanger from Lowes.
7) Squirt a bit of your favorite primer on...
Enjoy your re-cycled bolts!
I hope it was as good for you as it was for me.
(Of course, you could always buy new bolts)
BlackJeep
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Re-cycle your hardware - the best tool my wife ever gave me!
-
- 10+ Years
- Posts: 377
- Joined: Sun Nov 06, 2005 6:28 pm
- Zip Code: 26321
- Tractors Owned: -
1952 Farmall Cub "Squeaky"
1954 Farmall Cub "Patience"
2013 Kubota L3200 - Location: Alum Bridge, WV
Re-cycle your hardware - the best tool my wife ever gave me!
----- Farmall Cub - The most fun you can have with your pants on...
-
- Team Cub Mentor
- Posts: 4914
- Joined: Tue Jun 07, 2005 2:30 pm
- Zip Code: 46055
- Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines - Circle of Safety: Y
- Location: IN, McCordsville
-
- Similar Topics
- Replies
- Views
- Last post
-
-
One thing IH should have gave the Cub Attachment(s)
by SamsFarm » Fri Feb 04, 2022 8:14 pm » in Farmall Cub - 44
- 1351
-
by akguy09
Fri Feb 11, 2022 3:55 pm
-
-
-
Mounting 2nd wheel weights inside - hardware? Attachment(s)
by Workinprogress » Sat Feb 11, 2023 8:25 am » in Farmall Cub - 16
- 736
-
by Workinprogress
Wed Mar 15, 2023 7:16 pm
-
-
- 11
- 1791
-
by Boomer84
Thu Apr 06, 2023 9:23 am
-
- 15
- 745
-
by Don McCombs
Wed Oct 27, 2021 3:19 pm
-
- 2
- 194
-
by Cooter
Wed May 08, 2024 8:52 pm
Who is online
Users browsing this forum: No registered users and 1 guest