Pin holes in Air Cleaner Cup

Tips and tricks on repairs to your Cub’s structure.

Moderator: Team Cub

outdoors4evr
10+ Years
10+ Years
Posts: 1929
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Pin holes in Air Cleaner Cup

Postby outdoors4evr » Thu Oct 31, 2019 9:09 am

If you heat epoxy with a heat gun, it will get thin and flow. You could then get it to flow around the bottom of the cup and fill like a coating. Because the epoxy is thin, it will want to flow into the pinholes so before you start pouring epoxy, put some blue painters tape on the bottom of the pinholes. Let the epoxy harden before removing the painters tape.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

  • Similar Topics
    Replies
    Views
    Last post

Return to “Frame/Sheet Metal”

Who is online

Users browsing this forum: No registered users and 1 guest