This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Allen head cap bolts
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Allen head cap bolts
I noticed that allen heads were mentioned in another post. Working and restoring motorcyles for the past 10+ years I ran into many stripped allen socket cap screws. I take a flat nosed punch and pein the socket opening in to close it up. Then i take the allen wrench and drive it into the screw to make a new hex. It comes out tight so you can remove the screw or pipe plug. I did this in hard to reach screws too with a longer punch and i used an allen hex socket with an extention to extract the screw. This has saved my butt and the motorcyle many times. This happens a lot on dirtbikes when they hit rocks. Its a great trick to know.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Miscellaneous Ideas”
Who is online
Users browsing this forum: No registered users and 3 guests