Ed Harbur and Jim Becker have come up with some great designs for fuel shutoff valve tools. Here's how they did it in their own words and photos.
Ed Harbur's design...
I made myself a tool for the L shaped shut off valve. It's very simple - a 3/4" x 10" piece of aluminum rod with with a 5/16" wide x 1/2" deep x 1/2" long slot milled up one side (not across the end) with a through hole at the end of the slot. Works well enough, and quick and easy to make, even for a very amateur machinist like myself.
Jim Becker's design...
It is made from 1 foot of 1/2 PVC pipe. The first end shown is for use with "L" type handles. Drill a 1/4 hole on one side of the pipe 1/4 from the end of the pipe. Then use a hacksaw to cut it into a slot. The second end is for use with "T" type handles. Drill a 7/16 hole clear through that just touches the end of the pipe. Then use a hacksaw to cut both holes into slots. Since it is so close to the end, it may be easier to drill a hole a little bit from the end then cut the excess off or just cut slots with a hack saw.
Splitting stand, mounting stands, etc, etc.
Moderator: Team Cub
1 post • Page 1 of 1
- Team Cub Mentor
- Posts: 13139
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
- Circle of Safety: Y
- Location: MD, Deep Creek Lake
- Similar Topics
- Last post
New fuel bowl/shutoff valve hard to turn open and closed.
by J3 Driver » Tue Oct 24, 2017 6:35 pm » in Farmall Cub
by J3 Driver
Sat Oct 28, 2017 9:06 am
Mon Jul 04, 2016 6:37 am
Left fuel valve open 2 weeks and now cub won't start.
by Condre' » Tue Aug 23, 2016 5:00 pm » in Farmall Cub
Sat Aug 27, 2016 9:38 am
by Jim Becker
Sun Dec 31, 2017 1:09 pm
by Bill Hudson
Fri Mar 23, 2018 10:09 am
Who is online
Users browsing this forum: No registered users and 0 guests