Rick Dulas' aka WisconsinCubMan Memorial Jack Stand
Posted: Wed Apr 22, 2009 2:06 pm
After thousands of people requested information on the Belly stand (ok, I'm sure somebody thought about requesting information), I've drawn up a set of plans for jackstand/belly stand that is height adjustable, provides additional flexibility, and is reasonably easy to assemble. All the joints are lap joints rather than butt joints so if your welding is a little rusty, you can still assemble this jackstand with confidence. You can construct other center posts besides the saddle. I have a flat top center post with a bottle jack bolted on to it. What follows are 3 .gif images of the information on this jackstand. They are located on the Cub photo server so you can get and print the full-size versions. If you find any problems or things are not clear, drop me a PM.
→→→ CONSTRUCTION QUALITY AND USE OF THIS JACKSTAND IS A HEALTH & SAFETY ISSUE ↠â†â†
If you are not confidant in your welding and assembly skills, do not put one of these jackstands together and then complain when your tractor falls on your leg.
PAGE 1
PAGE 2
PAGE 3
I have some pictures of my prototype that I will be posting shortly.
Rick (Mikey likes it!) Dulas
→→→ CONSTRUCTION QUALITY AND USE OF THIS JACKSTAND IS A HEALTH & SAFETY ISSUE ↠â†â†
If you are not confidant in your welding and assembly skills, do not put one of these jackstands together and then complain when your tractor falls on your leg.
PAGE 1
PAGE 2
PAGE 3
I have some pictures of my prototype that I will be posting shortly.
Rick (Mikey likes it!) Dulas